Project Spec Version 4
Follow the instructions below to setup Project Spec 4 Integration with e-manage|ONE. If you are on Project Spec Version 5 please skip these steps and see the lower section of this page.
You need to have Project Matrix installed on the computer you installed e-manage|ONE on.
Once Project Matrix is installed you will need to map the following which is located under Tools > Configure User Settings > Personal Settings tab.
You MUST have a path entered as well a "Sif Import to Use" filled in. The path should be directed to the "Project Spec 4" folder as follows:
C:\Program Files (x86)\ProjectMatrix\ProjectSpec4
After mapping the file path you will need to copy the ItemSpecification.exe file from the e-manage ONE folder located typically located in C:\Program Files\e-manageONE\Integrations\ProjectMatrix.
If e-manage One is not located in this file location, you can easily identify the location by right clicking on your e-manageONE application on your desktop and selecting Properties.
The “ItemSpecification.exe” file will need to be pasted in the Project Spec folder located in C:\Program Files (x86)\ProjectMatrix\ProjectSpec4.
Project Spec Version 5
Follow the instructions below to setup Project Spec 5 Integration with e-manage|ONE.
You need to have Project Matrix installed on the computer you installed e-manage|ONE on.
Once Project Matrix is installed you will need to map the following which is located under Tools > Configure User Settings > Personal Settings tab. Simply select “Version 5” as the Version and it will locate the Project Matrix File Path for you. You must also be sure to enter a “SIF Import to Use”. You should select “SIF Import! .sif File”.
**NOTE: You must have Project Notify installed for the “Project Matrix Path” to route properly!