πŸ”§ Spec & Cyncly Integration Setup

πŸ”§ Spec & Cyncly Integration Setup

πŸ“Œ Overview

This article walks you through setting up Spec (Version 5 or higher) and/or Cyncly CAP 2020 integration with e-manage|ONE.

Proper configuration ensures seamless importing of .SIF files and a smooth workflow between your specifying software and e-manage|ONE.


🧩 Spec Integration Setup

πŸ”— Prerequisites

Before configuring, ensure the following:

  • πŸ’» Spec (Version 5 or higher) and e-manage|ONE are installed on the same computer

  • πŸ” Project Notify is installed

πŸ“’ About Project Notify
Project Notify is a supporting utility that enables communication between Spec and e-manage|ONE by handling file path routing. This ensures both systems can locate and exchange SIF files properly.

⚠️ Note: Project Notify is not required for Cyncly CAP 2020 users


βš™οΈ Configuration Steps

  1. In e-manage|ONE, navigate to:
    Tools β†’ Configure β†’ User Settings

  2. Locate the SIF Settings section

  3. Configure the following:

    • Set Spec Version to β€œ5”

    • Confirm the Spec Path auto-populates

    • Set Default SIF Import to:
      β€œSIF Import! .sif File”

image-20260406-164756.png

πŸ“’ Troubleshooting Tip:
If the path does not auto-populate, verify that both Spec and Project Notify are properly installed.

βœ… Next Steps

  • Once setup is complete, you’ll be able to import from Spec directly into your Bill of Materials in e-manage|ONE.

For instructions on how to use this integration in practice, see our article: ➑️ Using the Spec Integration Tool in e-manage|ONE

πŸ”— Cyncly CAP 2020 Integration Setup

πŸ”— Prerequisites

  • πŸ’» CAP 2020 and e-manage|ONE must be installed on the same computer


βš™οΈ Configuration Steps

  1. In e-manage|ONE, navigate to:
    Tools β†’ Configure β†’ User Settings

  2. In the SIF Settings section:

    • Confirm the Cyncly Path auto-populates

    • Set Default SIF Import to:
      β€œSIF 2020 Import! .sif File”

image-20260427-215724.png

βœ… Next Steps

Once setup is complete, you can import directly from CAP 2020 into the Bill of Materials (BOM) in e-manage|ONE.

For instructions on how to use this integration in practice, see our article: ➑️https://emanageone.atlassian.net/wiki/x/AoBEqg

πŸ’‘ Best Practices

  • Ensure all required programs are installed before configuring settings

  • Verify file paths populate automatically to avoid import issues

  • Standardize SIF import settings across users for consistency